Company News

Automotive division manual and automatic transmission, most people who buy a car like automatic transmission cars, open up more easily, simple, but some riders like operations manual will usually open the car, they think only their own personal go control every part of the car, in order to truly fun to drive, but the car driving manual there is a lot to pay attention to the place, below small explain the correct use of a manual transmission car clutch points to appreciate.
Automotive division manual and automatic transmission, most people who buy a car like automatic transmission cars, open up more easily, simple, but some riders like operations manual will usually open the car, they think only their own personal go control every part of the car, in order to truly fun to drive, but the car driving manual there is a lot to pay attention to the place, below small explain the correct use of a manual transmission car clutch points to appreciate.
Correct vehicle start
Insert the key to the ACC stop rotating, wait about 2 to 3 seconds, so the main power relay contacts solid contact, so the first part of the device is powered need energized; continue Turn the key to ON, then stop waiting for 6 to 10 seconds, so pump relay, waiting for adjustment of status after completion of each sensor, Turn the key to sTART oN returned to the engine at the continuous operation under the guidance of the computer to automatically adjust the position of one of the best and the best parameters, the last successful startup engine. However, after a short stop for temporary or can not pause, just after the yellow lights on the instrument panel goes out to observe, you can quickly start.
A quick two slow three linkage
Start operating essentials clutch pedal is a fast, two slow, three linkage. That is when the pedal is lifted soon began to lift; when clutch semi-linkage, the pedal is lifted at a slower pace; fully integrated by linkage to the process, slowly lift the pedal. In the clutch pedal to lift the same time, depending on the engine size gradually depress the accelerator pedal resistance, making the car a smooth start.
Note throttle with
The shift in the road, the manipulation should be quickly depress the clutch pedal and lift, do not appear semi-linkage phenomenon, otherwise, it will accelerate clutch wear. In addition, the operation should pay attention to the throttle with. In order to shift smoothly, reducing transmission shifting mechanism and clutch wear, advocating the use of his legs clutch shift method. Although this method is more complicated operation, but it is a good way to drive the car to save money the province.
Do not step off without incident
Clutch on the car during normal driving, is in close contact state, the clutch should not slip. In addition to the car while driving start, shift and low speed brake clutch pedal needs, the other time do nothing to step on the clutch, or a foot on the clutch pedal, clutch pedal on his feet for a long time while driving, it is easy cause slipping clutch, clutch ablation phenomenon, even when serious clutch pressure plate, flywheel end surface ablation strain, resulting in the clutch compression spring annealing and other failures. At the same time, also lead to cost oil, car expenses, increase traffic costs.
Less clutch when braking
Driving in the car, in addition to the low-speed parking brake clutch pedal needs, the braking under all other circumstances try not to depress the clutch pedal. Manipulation methods in low-speed driving parking brake is to depress the brake pedal and then depresses the clutch pedal, making the car a smooth stop.
Xiaobian Summary: The correct use of the clutch it helps to reduce wear and maintain its service life, but also in driving the process can be relatively stable and secure.