Company News

The clutch is located between the flywheel housing of the engine and the gearbox, the clutch assembly is fixed by screws on the back plane of the flywheel, the clutch output shaft is the gearbox input shaft. In the process of moving the car, the driver may need to depress or release the clutch pedal, the engine and gearbox temporary separation and gradually engaged to cut or transfer of power from the engine to the transmission input.
Clutch is commonly used components in mechanical transmission, the transmission system can be separated or joined at any time. Its basic requirements are: engagement smooth, rapid and thorough separation; easy to adjust and repair; small outside dimensions; small mass; wear resistance and has sufficient cooling capacity.
Novice drivers when there will be some errors on the use of operating the clutch. As a novice, due to unskilled driving skills, skills for unskilled clutch operation, it is difficult with the oil from the well, resulting in some of the methods of operation detrimental to appear in the clutch when using the clutch, and these cases also appear in the semi-linkage of the time.
Avoid prolonged clutch linkage in a semi-state in order to effectively protect the clutch. In the clutch operating skills mentioned, just when some novice road due to nervousness, oil from the well, afraid of their own off the car stalled at the start, so he boom throttle and clutch are low, half-full nor lift achieve full linkage. At this time the engine speed and the rotational speed of a shaft there is a huge difference in rotational speed, and the vehicle is started slowly, the speed difference between all these huge digested by the half-clutch linkage, which is destroyed clutch approach. In order to avoid frequent start ramp, foot and a half step on the clutch, so the linkage can be used to control the car's half speed, which is commonly known costumes clutch go.
The whole process is sliding friction clutch, this time sliding friction can also damage the clutch. The driver drove onto the road always like to put his left foot on the clutch pedal, causing unconscious depressed the clutch pedal, the vehicle for a long time in a semi-linked state. Clutch operating skills believe that all of these operations will accelerate wear clutch clutch plate on the vehicle's power and economy will result in losses.
Some special road, rational use of semi-linkage can make the vehicle turnaround. In the clutch operating skills mentioned, except when starting and shifting needs of semi-linkage, under certain conditions is also used to semi-linkage. When we are all linked conditions in a block, can not get enough power, you can borrow half the principle of linkage play engine performance.