Professional four-wheel drive off-road components
lutch started trembling how to do?
Published:
2024/8/30
Symptom: Forklift automobile clutch at the very start, the body occurs jitter. Cause
(A) separating highly leveraged inconsistent, uneven pressure plate spring force or individual broken, and the pressure plate has grooves and so on.
(2) follower plate and hub loose rivets, rivet exposed friction plate, driven plate deformation grievances.
(3) the engine mounting bolts loose bolts loose gearbox and flywheel housing, clutch cover bolts loose, loose flywheel bolts, etc., will cause the vehicle start shaking. Analysis to determine
(A) First step, lift the clutch pedal, clutch release bearing checking retreat is flexible. If not completely then return, you should check whether the return spring release bearing off, break or stretch too weak.
(2) Remove the clutch housing bottom, check the separation lever height are the same as the height of inconsistency should be re-adjusted, the separation of excess leverage head wear should be replaced or repaired.
(3) Check the transmission and flywheel housing bolts, engine mounting bolts and clutch cover bolts are loose, as loose should be tightened.
(4) the clutch hub rivets loose, uneven friction plate, pressure plate and friction plate rivets grooved outer,,, should tighten or repair. Uneven compression spring break or stretch should be replaced.
Lungutong
Welcome To Know Our Products
Get More Product Service Information
Follow us
we are manufacturing factory, so we can give you the best quality and the good price.
Contact Info
Address： Changqiao Industrial Zone, Tangxia Town, Ruian City, Zhejiang Province
Mobile：13958821678/0577-65832975 Fax: 0577-65296581
Email: lungutong@lungutong.com / 931640137@qq.com
Copyright (c)2017-2024 Ruian Lungutong Auto Parts Co., LtdAll Rights Reserved. All Rights Reserved. 备案号：浙ICP备2024113792号-1
